Skip Navigation

November 2019 Newsletter





You are receiving this email because you have had a pre-existing relationship with Scantek, Inc. or one of its employees.  If you would like to be removed from this email list you may unsubscribe with the link at the end of the newsletter.
Scantek’s November 2019 Newsletter 

 CadnaA 2020 Is Out Now!



Main new features:
  • Automatic check and adjustment of the configuration of calculations for selected standards
  • Saving of the partial levels for each variant in the CadnaA-file
  • Locate any intersection of contour lines automatically (Option X required)
  • Calculations compliant with CNOSSOS-EU with national regulations for Germany and Austria


Noise monitoring with direction — Noise Compass Nor1297


With the Nor1297 the user will be able to measure sound pressure the way they always have. Once the Nor1297 is added to your setup you will be able to detect the direction of a dominant sound source in all three dimensions.



Visit our LinkedIn or our Blog to follow us.

Tri-axial Ground-borne Vibration Meter VM-56


Ground-borne vibration noise is the rumbling sound heard in buildings that are located above and around underground railways and railway stations and near roadways and bridges. It is produced by vibrations caused by moving transit vehicles. Ground-borne vibration noise levels are predicted and evaluated by applying a factor to the octave or third octave band vibration levels to predict octave/third octave band sound pressure levels.
The Tri-axial Groundborne Vibration Meter VM-56 and its optional program VX-56WR combination are ideally suited for recording of the vibration signals for this application because of the system’s high sensitivity and wide frequency range (From 0.5 Hz up to 315 Hz). Analysis can subsequently be carried out in octave or third octave bands as necessary using the RION Waveform Analysis software AS-70GV.
Find more information here, VM-56 Application Examples


Save 10% off of your 1st Calibration Order from the Scantek Calibration Laboratory.
Mention you saw this ad and send request for quotes to [email protected] or call 410-384-4254 for more details. 

About Scantek


Scantek, Inc. is the leader in sound and vibration instrumentation sales, service, rental and calibration. Scantek sells, services, and rents the finest products and provides expert support on their use. The Scantek Calibration Laboratory is accredited for microphones, calibrators, sound level meters, dosimeters, sound and vibration FFT and real-time analyzers, preamplifiers and signal conditioners, accelerometers, velocity sensors, vibration meters and vibration exciters.  Scantek, Inc is a wholly owned subsidiary of Norsonic AS.


  • CadnaA 2020 is out now! 
  • Norsonic Noise Compass
  • CadnaA and CadnaR Maintenance Price Changes 
  • Noise-Con New Orleans 2020
Scantek proudly offers products from:
Scantek offers products for:


Scantek, Inc.Headquarters

6430 Dobbin Rd #C, Columbia, MD 21045  
Phone: 410-290-7726
Toll Free: 800-224-3813



Scantek Inc., 6430 Dobbin Rd Suite C, Columbia, MD 21045
Sent by [email protected] in collaboration with
Constant Contact
Try email marketing for free today!


This entry was posted on Wednesday, November 6th, 2019 at 3:10 pm. Both comments and pings are currently closed.